OPS 32 is now obsolete - HAch WIMS is the replacement product
There are 3 steps to update your program - we recommend you print this sheet.
- Download the update installer file (EX. up263.exe)
- Run update installer file to extract OPS32 Update Installer files
- Run Setup to install update
Step 1: Download
Note: In this example we download Up349.exe. The numbers represent the version number so Up349.exe is version 3.4.9.
-
First, you need to the download the up349.exe file, (EX. up349.exe), required for this maintenance patch. (click the BACK button to get to the download page).
- Now you will need to choose a directory on your hard drive. Make sure you remember this directory & path. Write it down. We chose C:\TEMP\OPS32 to be our download directory.
![](http://www.opssys.com/instantkb/Attachments/aa81fa74-0547-49c5-8da1-e06e.jpg)
Click on the Save button.
- After a few seconds, a download window will pop up. This window shows you the downloading status. You need to wait until the progress bar reaches 100%, which means that your file download is done. Once again, make sure that you remember where the file is being downloaded to.
![](http://www.opssys.com/instantkb/Attachments/744ae834-5b3f-4943-86c9-d597.jpg)
After it is done downloading, click on the CLOSE button. In some cases the window closes automatically.
- Once UP349.exe is downloaded, you are ready to extract the file.
Step 2: Extract
- Make sure OPS32 is NOT running.
- Click on the windows Start button (which opens up your start menu). Then click on Run. It will open up a window that will look similar to this one:
![](http://www.opssys.com/instantkb/Attachments/e8951779-4d15-4ff6-9953-65e2.jpg)
Type in the exact path to the downloaded file (which in our case is C:\TEMP\OPS32\up349.exe). Click OK.
- If you typed in the right path, it should come up with a window looking like this :
![](http://www.opssys.com/instantkb/Attachments/4cb858f1-69fc-4445-a720-608a.jpg)
WARNING!: Before you do anything else, make sure that your OPS 32 path matches the one in the Extract To input field. It must match exactly.
- During extraction, it may come up with a window that looks similar to :
![](http://www.opssys.com/instantkb/Attachments/ec036071-a8b9-498a-a4bc-9561.jpg)
If it does, click YES (or Always) meaning to want to overwrite those files.
Step 3: Setup
- Click on the windows Start button (which opens up your start menu). Then click on Run.
- Type c:\ops32\update\setup.exe to open the setup program. The setup program will start.
- Follow the instructions on the screen to complete the installation.
Please be sure to call technical support if you need any help at 1-800-677-0067.
Thank you for using OPS 32 software.